This guide explains which tapered or conical sublimation blanks may be suitable for a 17oz conical mug heat mat, and what to check before pressing customer orders.
Conical blanks are different to straight tumblers and mugs because the top and bottom diameters are not the same. That means fit, pressure and artwork alignment need extra care.
A 17oz conical mug heat mat is designed for tapered cylindrical blanks rather than straight-sided tumblers only. The key difference is that conical products have different diameters at the top and bottom.
This taper can create uneven pressure if the wrong heat mat is used. One end may press firmly while the other end is loose, which can cause faded areas, uneven colour or incomplete transfer.
Products listed in the compatible products section have been measured, matched or grouped for this heat mat size. Always test a new blank before producing customer orders.
Some items may be usable in other branded heat presses or heat mats, but Print Geek does not recommend or support returns based on products being used outside their tested compatibility. Always check fit, pressure and coverage before production.
The top of the conical blank needs enough contact pressure without being crushed, pinched or over-tightened.
The bottom diameter may be different, so check that both ends of the blank receive even contact.
Tapered products often need tapered artwork templates, not just a straight rectangular wrap.
Before pressing a customer order, test fit the blank and check contact across the whole printable area. Conical blanks can appear to fit at first, but still have pressure issues at one end.
A straight mug or tumbler has a fairly consistent diameter, so the heat mat can apply similar pressure from top to bottom. A conical blank changes diameter along its height, which means pressure may vary unless the heat mat suits the shape.
If the pressure is uneven, you may see faded patches, washed-out edges, ghosting or incomplete transfer near the top or bottom of the blank.
| Check | Why it matters | Print Geek tip |
|---|---|---|
| Taper | Conical blanks have different top and bottom diameters. | Check contact at both ends before applying heat. |
| Artwork shape | A straight rectangle can look distorted or misaligned on tapered products. | Use a conical/tapered template where possible. |
| Pressure | Uneven pressure can cause faded transfer areas. | Use firm contact without forcing the press closed. |
| Rotation | Some conical items may not receive full coverage in one position. | Rotate carefully if required and keep the transfer secured. |
| Test blanks | Conical blanks vary between suppliers and batches. | Do a test press and record the working settings before customer orders. |
Treat press settings as starting points, not universal rules. Blank coating, transfer paper, artwork coverage, press pressure and room conditions can all affect the final result.
The products below are grouped for the 17oz conical mug heat mat. These items have been measured or matched for this heat mat style, but you should still test fit, pressure and rotation before producing customer orders.
Browse the compatible products assigned to this heat mat size. Product availability, pricing and stock status are controlled by WooCommerce.
If your blank does not suit the 17oz conical mug heat mat, compare nearby heat mat sizes and product groups.
These guides can help customers set up artwork and print pages correctly before pressing mugs, tumblers and other sublimation blanks.
It is used for tapered or conical sublimation blanks that suit the heat mat’s shape, pressure and coverage area.
Not always. Conical mugs have different top and bottom diameters, so a straight heat mat may not apply even pressure across the blank.
Often yes. Tapered products can require tapered artwork templates so the design aligns correctly after pressing.
Some conical blanks may need rotation depending on the printable area, mat coverage and press design. Test before customer work.
You can test other products, but Print Geek cannot guarantee compatibility for untested blanks or support returns based on products being used outside their recommended setup.
Check taper, pressure and printable coverage before production. Then use tested compatible products wherever possible for more reliable sublimation results.
