Aluminium Sheet Wall Mount Magnet Kit 120 x 120

📖 What to know about the Aluminium Sheet Wall Mount Magnet 120 x 120

This magnetic wall mounting system hangs sublimated aluminium signage, photo panels and prints without drilling a single hole. Nothing is screwed, nailed or plugged into the wall, which makes it well suited to rentals, offices, shopfronts and display walls where patching and repainting later is not an option.

Each kit contains three parts: a 120 x 120 mm magnet, a 120 x 120 mm steel plate, and a 200 x 200 mm removable wall sticker. Both plates arrive with double-sided tape already applied, so there is no separate adhesive to buy and nothing to mix, clamp or cure.

The wall sticker goes up first and protects the surface underneath. One plate fixes to the sticker and the other tapes to the back of your finished panel, so the print lifts on and off the wall in one movement. Aluminium is not magnetic on its own, so it is the pair of plates that does the holding. Swapping seasonal artwork, rotating a display or taking a sign down to clean it becomes a two second job.

This is the larger of the two kits and is rated for finished prints up to 600 x 400 mm, which covers the bigger indoor panels and most one piece signage. If your prints are smaller than 400 x 300 mm, the 80 x 80 kit will do the same job for less. Both kits are designed around 1.15 mm HD sublimation aluminium, so thinner sheets weigh less again and sit comfortably inside the rating.

When the display comes down, the panel lifts off the magnet and the wall sticker peels away, designed to leave the surface unmarked. As with any adhesive mount, fit it to a clean, dry, smooth surface, and test on delicate wallpaper or freshly painted plaster before committing to a final position.